Products

The Concrete Pipe Making Machine is used for reinforced concrete drainage pipe production. Different forming processes can be selected according to pipe diameter, joint type, production method,...

The vertical concrete pipe making machine uses high-frequency vibration for reinforced concrete drainage pipe production.
Its production range is Φ800–4000 mm with applicable pipe lengths...

Vertical vibration production puts unusually repetitive loads on its forming tooling: the mold is assembled, vibrated, opened, stripped, cleaned, and returned to service again and again. For that...

A factory that frequently changes drainage-pipe diameters needs cage production to change size without turning every product switch into a long setup. The Fully Automatic Variable Diameter Cage...

Pipe tooling determines the finished outer shape, joint geometry, and the way a pipe releases after forming. A Concrete Pipe Mold may be designed as a flat-joint mold, socket-and-spigot mold,...

Concrete poles vary in length, taper, reinforcement, and process requirements, so their steel tooling needs to follow the actual pole design. A Concrete Pole Mold is normally used with a pole...

The Cement Product Plastic Mold is designed for cement products that require specific shapes and dimensions. Because finished products can vary significantly in appearance and size, this type of...

Sealing-ring selection starts with the pipe joint, not with a generic ring name. A Cement Pipe Rubber Ring is supplied according to the cement-pipe diameter, joint profile, and confirmed...

The cage inside a prestressed pole has to meet the end plate, not just the mold: longitudinal bars are anchored at the plate, the spiral hoop runs the length of the taper, and the cage has to stay...

A concrete pole steel mold is the tool that decides whether a pole comes out straight, and it is asked to do that over hundreds of cycles with prestressing force acting on its end plates. The mold...

A pole centrifuge spins the pole mold about its long axis so the concrete is thrown outward and the section consolidates against the shell. Two things distinguish it from a pipe centrifuge: the...

Cement pole production differs from a general precast yard in one respect: almost every station is tied to a single pole design at a time. The cage is welded to the pole drawing, the mold cavity...